Your customer is in the early stages of an AI project. They are requesting a POC demonstrating how they can utilize on-prem data with a limited amount of rack space, in an air-cooled environment.
Performance with the AI use case of Retrieval-Augmented Generation (RAG) will be the primary factor in their decision making.
Which HPE Compute offering would be suitable in this scenario?

• A. HPE ProLiant Compute DL384 Gen12 with NVIDIA GH200 NVL2.
• B. HPE Cray XD670 with NVIDIA H200 Tensor Core GPUs.
• C. HPE ProLiant Compute DL560a Gen12 with NVIDIA H200 NVL GPUs.
• D. HPE ProLiant Compute DL320 Gen11 with NVIDIA L4 GPUs.

Your customer is planning a Scality RING solution. Approximately 750 TB of data must be stored on the SDS. The customer prefers SSD or NVMe drives. What is true regarding this solution?

• A. Scality RING Single Site Hardware Lifetime licenses are provided at a lower cost compared to perpetual licenses.
• B. The minimum capacity for ordering Scality RING perpetual licenses is 1000TB.
• C. Scality licenses cannot be purchased from HPE.
• D. HPE servers, for example, such as Alletra Storage Server 4120, can be used for Scality RING deployments.

Your customer has a networking environment based on Aruba CX 8325 switches configured with Quality of Service settings that give higher priority to iSCSI traffic between HPE ProLiant servers and HPE Alletra 6000 storage.
They are planning to add HPE Synergy frames with HPE Virtual Connect modules that will connect to the same Aruba infrastructure. The servers will be deployed in different VLANs. They need to update their environment to provide a lossless fabric for RoCE traffic that will traverse between the HPE Synergy frames and through multiple switches.
Your customer has two sets of Synergy frames in different logical enclosures connected with Aruba CX 8325 switches. They want to update their environment to provide a lossless fabric for RoCE traffic.
What is the correct environmental or design change that will meet the customer's new requirement?

• A. The HPE Synergy frames must be connected to different switches for RoCE traffic and Ethernet traffic.
• B. The Aruba CX 8325 switches must be changed to Aruba CX 8400 to support Data Center Bridging eXchange (DCBX).
• C. Use RoCEv2 and properly design networking map for the Layer 3 interfaces on the path.
• D. Use RoCEv1 and configure DCBX on the switch facing the CNA in the servers.

Your customer plans to replace a legacy HPE BladeSystem solution with the HPE Synergy platform.
The customer requirements include:
30 compute nodes to support their virtualization workloads
Redundancy within the management subsystem
An in-frame storage solution to support vSAN
A redundant networking subsystem with the ability to virtualize WWNs
Simplified management with a single logical enclosure
You are reviewing the following proposal:
3 x HPE Synergy 12000 frames
2 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
4 x HPE Synergy 50Gb Interconnect Link Modules
3 x HPE D3940 Storage Modules with maximum number of drives
6 x HPE Composer2 + 30 x HPE OneView Advanced licenses
30 x SY 480 Gen11 compute modules, each with 2 CPUs and appropriate
mezzanine cards
Which statement about this proposal is true to help meet the customer requirements?

• A. HPE 32Gb switches should be added to the proposal to enable WWNs virtualization and profile mobility.
• B. Additional HPE OneView Advanced licenses should be added for the HPE Virtual Connect modules and HPE D3940 Storage Modules.
• C. 30 x HPE OneView Advanced licenses should be removed from the proposal.
• D. 3 x HPE Composer2 modules can be removed from the proposal, as you need one HPE Composer2 module per HPE Synergy frame for enhanced availability.

Your customer is planning to deploy several HPE ProLiant DL360 Gen11 servers with Windows Server 2025, for a bare-metal use case with no hypervisors. The customer is concerned about the time it takes to scan and deploy the servers for new firmware and driver updates. What HPE management tool can be used in this scenario to apply firmware updates to servers, with direct integration to HPE repositories?

• A. HPE OneView
• B. HPE Compute Ops Management
• C. HPE iLO Amplifier
• D. Microsoft Endpoint Configuration Manager