Aug-2023 Cisco 400-007 Actual Questions and 100% Cover Real Exam Questions [Q39-Q55]

Share

Aug-2023 Cisco 400-007 Actual Questions and 100% Cover Real Exam Questions

400-007 Free Exam Questions and Answers PDF Updated on Aug-2023

NEW QUESTION # 39
An architect receives a business requirement from a CTO that states the RTO and RPO for a new system should be as close as possible to zero. Which replication method and data center technology should be used?

  • A. synchronous replication over dual data centers via Metro Ethernet
  • B. asynchronous replication over dual data centers via DWDM
  • C. synchronous replication over geographically dispersed dual data centers via MPLS
  • D. asynchronous replication over geographically dispersed dual data centers via CWDM

Answer: A


NEW QUESTION # 40
Company XYZ network runs IPv4 and IPv6 and they want to Introduce a multidomain, multicast-based network. The new design should use a flavor of PIM that forwards traffic using SPT. Which technology meets this requirement?

  • A. PIM-SM
  • B. PIM-DM
  • C. BIDIR-PIM
  • D. PIM-SSM

Answer: D


NEW QUESTION # 41
Which two mechanisms avoid suboptimal routing in a network with dynamic mutual redistribution between multiple OSPFv2 and EIGRP boundaries? (Choose two.)

  • A. AD manipulation
  • B. route tagging
  • C. matching OSPF external routes
  • D. matching EIGRP process ID
  • E. route tagging
  • F. route filtering

Answer: B,E


NEW QUESTION # 42
Your company wants to deploy a new data center infrastructure Based on the requirements you have chosen VXLAN as encapsulation technology The customer is concerned about miss-configuration of Layer 2 devices and DC wide outages caused by Layer 2 loops What do you answer?

  • A. VXLAN offers native loop avoidance mechanism
  • B. BPDU Guard should be enabled on all VTEP access ports
  • C. VPC+ could prevent L2 loop on access ports
  • D. Storm Control should be enabled on all ports

Answer: B


NEW QUESTION # 43
An engineer is designing a DMVPN network where OSPF has been chosen as the routing protocol A spoke-to-spoke 'J<ita propagation model must be set up Which two design considerations must be taken into account? (Choose two )

  • A. Configure all the sites as network type broadcast
  • B. The network type on all sites should be point-to-multipoint
  • C. The network type should be point-to-multipoint for the hub and point-to-point for the spokes.
  • D. The hub should be set as the DR by specifying the priority to 255.
  • E. The hub should be the DR by changing the priority of the spokes to 0.

Answer: A,E


NEW QUESTION # 44
Drag and drop the FCAPS network management reference models from the left onto the correct definitions on the right.

Answer:

Explanation:


NEW QUESTION # 45
Software-defined networking architecture is used for cost-effective, adaptable, and easily manageable applications. In which two software-defined networks is SDN commonly used? (Choose two.)

  • A. application network
  • B. metro network
  • C. wide area network
  • D. mobile network
  • E. control network

Answer: C,E


NEW QUESTION # 46
SDN emerged as a technology trend that attracted many industries to move from traditional networks to SDN. Which challenge is solved by SDN for cloud service providers?

  • A. complex and distributed management flow
  • B. need for intelligent traffic monitoring
  • C. higher operating expense and capital expenditure
  • D. exponential growth of resource-intensive application

Answer: D


NEW QUESTION # 47
Which solution component helps to achieve comprehensive threat protection and compliance for migration to multicloud SDX architectures?

  • A. platform-oriented architecture
  • B. system-oriented architecture
  • C. OSASE architecture
  • D. SASE architecture

Answer: D


NEW QUESTION # 48
Which undesired effect of increasing the jitter compensation buffer is true?

  • A. The overall transport delay increases and quality issues can occur.
  • B. The overall transport jitter decreases and quality improves.
  • C. The overall transport jitter increases and quality issues can occur.
  • D. The overall transport delay decreases and quality improves.

Answer: A


NEW QUESTION # 49
What are two primary design constraints when a robust infrastructure solution is created? (Choose two.)

  • A. total cost
  • B. component availability
  • C. staff experience
  • D. monitoring capabilities
  • E. project time frame

Answer: A,E


NEW QUESTION # 50
Which two benefits can software defined networks provide to businesses? (Choose two.)

  • A. decentralized management
  • B. enables innovation
  • C. reduction of OpEx/CapEx
  • D. reduced latency
  • E. meets high traffic demands
  • F. provides additional redundancy

Answer: B,C


NEW QUESTION # 51
Company XYZ is designing their network using the three-layer hierarchical model. At which layer must the QoS design classify or mark the traffic?

  • A. core
  • B. distribution
  • C. collapsed core
  • D. access

Answer: D


NEW QUESTION # 52
Which purpose of a dynamically created tunnel interface on the design of IPv6 multicast services Is true?

  • A. transport of all IPv6 multicast traffic
  • B. multicast source registration to the RP
  • C. first-hop router registration to the RP
  • D. multicast client registration to the RP

Answer: A


NEW QUESTION # 53
An enterprise campus is adopting a network virtualization design solution with these requirements
* It must include the ability to virtualize the data plane and control plane by using VLANs and VRFs
* It must maintain end-to-end logical path transport separation across the network
* resources available grouped at the access edge
Which two primary models can this network virtualization design be categorized? (Choose two)

  • A. Path isolation
  • B. Session isolation
  • C. Edge isolation
  • D. Services virtualization
  • E. Group virtualization

Answer: A,D


NEW QUESTION # 54
What advantage of placing the IS-IS layer 2 flooding domain boundary at the core Layer in a three-layer hierarchical network is true?

  • A. It can be applied to any kind of topology
  • B. It reduces the complexity of the Layer 1 domains
  • C. The Layer 2 domain is contained and more stable
  • D. The Layer 1 and Layer 2 domains can easily overlap

Answer: C


NEW QUESTION # 55
......

Cisco 400-007 Real 2023 Braindumps Mock Exam Dumps: https://freepdf.passtorrent.com/400-007-latest-torrent.html