HQT-4160 Study Guide Brilliant HQT-4160 Exam Dumps PDF
View HQT-4160 Exam Question Dumps With Latest Demo
NEW QUESTION # 18
How does the management software improve the operation of VSP 5000 systems?
- A. By simplifying user access controls
- B. By reducing physical maintenance needs
- C. By increasing the energy consumption
- D. By automating routine tasks
Answer: D
Explanation:
The Hitachi VSP 5000 management software provides a centralized interface to monitor, configure, and manage the storage system. One of its key benefits is automation of routine operational tasks, such as:
Creating and provisioning storage volumes
Assigning storage to hosts
Monitoring system health and generating alerts
Performing replication or backup scheduling
Rebuilding or rebalancing RAID groups automatically
Automation reduces manual intervention, minimizes errors, and improves operational efficiency.
NEW QUESTION # 19
You need to upgrade the cache of a VSP 5500 online. How do you accomplish this task?
- A. Use the Maintenance Utility to block the controllers one at the time, and add the extra cache to the blocked controller.
- B. Use Storage Navigator to put the CHB Adapters offline one controller at a time, and add the extra cache to the inactive controller.
- C. Use the Web Console to block the controllers one at the time, and add the extra cache to the blocked controller.
- D. Use the VSP GUI and click on Change Configuration and follow the instructions on the screen to add the extra cache.
Answer: A
Explanation:
To upgrade the cache online, you must use the Maintenance Utility to sequentially block each controller, add the extra cache modules to the blocked controller, and then unblock it, ensuring system availability throughout the process.
NEW QUESTION # 20
Which three RAID Group configurations are supported on a VSP 5000 system? (Choose three.)
- A. RAID1 (2D+2D)
- B. RAID6 (7D+2P)
- C. RAID6 (6D+2P)
- D. RAID5 (4D+1P)
- E. RAID5 (7D+1P)
Answer: A,B,D
Explanation:
RAID1 (2D+2D)
RAID1 (2D+2D) is a supported RAID1 configuration providing mirroring for high availability.
RAID5 (4D+1P)
RAID5 (4D+1P) is a commonly supported RAID5 layout with four data drives and one parity drive.
RAID6 (7D+2P)
RAID6 (7D+2P) is a supported RAID6 configuration, offering double parity and improved fault tolerance.
NEW QUESTION # 21
A disk drive is in failed state in a VSP 5600 system and you want to replace it. Which two actions should you perform as part of the replacement procedure? (Choose two.)
- A. Activate Dynamic Sparing.
- B. Replace the drive.
- C. Block the drive with the Maintenance Utility.
- D. Initiate the Correction Copy process.
Answer: B,C
Explanation:
Replace the drive.
Physically replacing the failed drive is a required step in the drive replacement procedure.
Block the drive with the Maintenance Utility.
Before removal, the failed drive should be logically blocked using the Maintenance Utility to safely isolate it from the system and prevent I/O errors during replacement.
NEW QUESTION # 22
Which management tool is used to create a Parity Group in a VSP 5000 system?
- A. Storage Navigator 2
- B. Maintenance Utility
- C. Hitachi Command suite
- D. Web Console
Answer: A
Explanation:
Storage Navigator 2 is the primary management tool used for configuring and managing storage on VSP 5000 systems, including the creation of Parity Groups.
NEW QUESTION # 23
Which two manuals should be used when troubleshooting on a VSP 5000 system? (Choose two.)
- A. Maintenance manual
- B. Installation manual
- C. Troubleshooting manual
- D. Service Guide
Answer: A,C
Explanation:
Troubleshooting manual
This manual provides detailed procedures and steps for diagnosing and resolving issues on the VSP 5000 system.
Maintenance manual
The Maintenance manual contains instructions and information needed for maintenance activities, including troubleshooting steps and part replacement guidance.
NEW QUESTION # 24
Which three statements are correct regarding the cache configuration of VSP 5000 systems with two controller boxes (CBX)? (Choose three.)
- A. All the DIMMs must be of the same type.
- B. CMG0 must be used as default and CMG1 is optional.
- C. Each controller pair (CTL1-CTL1, CTL2-CTL2) must have the same cache capacity.
- D. CMG0 or CMG1 can be used as default cache.
- E. The cache only support 128 GB DIMMs.
Answer: A,B,C
Explanation:
All the DIMMs must be of the same type.
Cache DIMMs are installed in groups (CMGs) of four, and all DIMMs within each group must be identical in capacity and speed to ensure correct interleave and performance.
CMG0 must be used as default and CMG1 is optional.
On each controller, you populate the CMG0 slots first - this becomes the active (default) cache and only after CMG0 is filled can you populate CMG1 for additional capacity.
Each controller pair (CTL1-CTL1, CTL2-CTL2) must have the same cache capacity.
Controllers operate in mirrored pairs and require symmetric cache configurations so that each side of the pair holds identical cache capacity for failover and data integrity.
NEW QUESTION # 25
What are two ways to identify that a problem occurred on a VSP 5000 system? (Choose two.)
- A. An Alert Information Message (AIM) was generated and communicated by SNMP to notify the customer.
- B. The Master Alarm LED at the top right of the front door is lit.
- C. The Remote Ops SVP Agent called home and a support case was generated.
- D. A SIM was generated and could be displayed using the SVP GUI.
Answer: B,D
Explanation:
The Master Alarm LED at the top right of the front door is lit.
A lit Master Alarm LED is a direct hardware indicator that a problem has occurred on the system.
A SIM was generated and could be displayed using the SVP GUI.
A Service Information Message (SIM) indicates an event or error and can be viewed via the SVP GUI, helping identify and diagnose system issues.
NEW QUESTION # 26
You need to create Parity Groups on a VSP 5100. Which three actions must you perform?
(Choose three.)
- A. Use the Web Console to select the appropriate drive type.
- B. Mount the drives in the appropriate slots of the Disk Unit (DKU).
- C. Use the Maintenance Utility to choose the drive allocation method (Manual or Automatic).
- D. Use the Maintenance Utility to add the drives that you want to allocate to these Parity Groups.
- E. Use Storage Navigator to create the Parity Groups.
Answer: B,C,E
Explanation:
Use Storage Navigator to create the Parity Groups.
Parity Groups are created and managed through the Storage Navigator interface.
Use the Maintenance Utility to choose the drive allocation method (Manual or Automatic).
The Maintenance Utility allows you to specify how drives will be allocated to Parity Groups, either manually or automatically.
Mount the drives in the appropriate slots of the Disk Unit (DKU).
Drives must be physically installed in the correct DKU slots before they can be assigned to Parity Groups.
NEW QUESTION # 27
Which three VSP storage systems are monitored by the Hitachi Remote Ops SVP Agent (Choose three.)
- A. VSP 5200H
- B. VSP G800
- C. VSP F900
- D. VSP G1500
- E. VSP E1090
Answer: B,C,D
Explanation:
These VSP storage systems are monitored by the Hitachi Remote Ops SVP Agent, which provides remote monitoring and support for enterprise-class Hitachi storage platforms.
NEW QUESTION # 28
How many IP addresses should you configure to integrate a VSP 5000 series storage system on the customer public network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
To integrate a VSP 5000 series storage system into the customer public network, you should configure two IP addresses - one for each Service Processor (SVP) to provide redundancy and ensure high availability for management access.
NEW QUESTION # 29
The creation of Parity Groups is essential for which aspect of VSP 5000 storage systems?
- A. Data protection and performance
- B. Network configuration
- C. Power consumption reduction
- D. User management
Answer: A
Explanation:
In the Hitachi VSP 5000 storage system, Parity Groups are used to implement RAID configurations, which are fundamental for:
Data protection - Parity information allows the system to rebuild data in case of a drive failure, preventing data loss.
Performance optimization - Spreading data across multiple drives with parity improves read/write throughput and I/O efficiency.
Parity Groups are essentially the building blocks of storage pools, and they determine the balance between capacity, redundancy, and performance.
NEW QUESTION # 30
A customer wants to upgrade a diskless VSP 5100 to a VSP 5500. Which three types of components will be added during the upgrade? (Choose three.)
- A. Channel Boards (CHBs)
- B. Interconnect Switches (ISWs)
- C. Hitachi Interconnect Edges (HIEs)
- D. Hitachi Service and Network Box (HSNBX)
- E. Controllers (CTLs)
Answer: A,B,E
NEW QUESTION # 31
You need to perform a microcode upgrade on a VSP 5500H and you first want to backup the configuration. How do you accomplish this task?
- A. Connect the maintenance laptop to the SVP port and use Copy Config Files.
- B. Use Copy Config Files under the Maintenance Utility.
- C. Connect a USB drive to the SVP and use Copy Config Files.
- D. Use Copy Config Files under the Initial Setting menu of the SVP GUI.
Answer: D
Explanation:
To back up the configuration before a microcode upgrade on a VSP 5500H, you should use the
"Copy Config Files" option available under the Initial Setting menu in the SVP GUI. This ensures a proper backup of system settings and configuration.
NEW QUESTION # 32
What are the key benefits of correctly performing a "New Installation" procedure for VSP 5000 storage systems? (Choose Three)
- A. Extended hardware lifespan
- B. Optimal system performance
- C. Enhanced system security
- D. Increased storage capacity
- E. Reduced risk of installation-related issues
Answer: B,C,E
Explanation:
Performing a proper new installation procedure for the Hitachi VSP 5000 ensures that the system is set up correctly and ready for reliable operation. Key benefits include:
Optimal system performance (B)
Correct configuration of storage controllers, network connections, and RAID groups ensures efficient I/O handling and system throughput.
Enhanced system security (C)
Properly configuring access controls, user permissions, and network settings helps protect data and prevent unauthorized access.
Reduced risk of installation-related issues (D)
Following the recommended steps minimizes errors such as connectivity problems, misconfigured storage, or hardware misalignment, which could lead to downtime.
NEW QUESTION # 33
Which tool is used for part replacement in a VSP 5000 system?
- A. Hi-Track
- B. Maintenance Utility
- C. Web Console
- D. Storage Navigator
Answer: B
Explanation:
The Maintenance Utility is the designated tool for performing part replacement operations in a VSP 5000 system. It provides the necessary procedures to safely block, replace, and unblock hardware components.
NEW QUESTION # 34
What is the primary function of management software in VSP 5000 storage systems?
- A. To physically secure the storage system
- B. To increase the storage capacity automatically
- C. To manage and configure storage resources
- D. To enhance the cooling efficiency of the system
Answer: C
Explanation:
Management software for the Hitachi VSP 5000 is used to administer, monitor, and configure the storage environment.
Common management tools include platforms from Hitachi Vantara such as storage management suites that allow administrators to:
Create and manage storage volumes (LUNs)
Configure RAID groups and storage pools
Assign storage to hosts
Monitor system health and performance
Manage replication and data protection
Perform firmware updates and system configuration
These tools provide a centralized interface to control and optimize the storage system.
NEW QUESTION # 35
What is a critical step in the pre-installation checklist for ensuring the physical security of the VSP
5000 system?
- A. Securing the racks to the floor
- B. Configuring firewall settings
- C. Setting BIOS passwords
- D. Installing surveillance cameras in the data center
Answer: A
Explanation:
The Hitachi VSP 5000 is a large enterprise storage system typically installed in data center racks.
A key pre-installation physical security and safety requirement is ensuring that racks are properly anchored or secured to the floor.
This step is critical because:
The storage system is heavy and tall, creating a tip-over risk.
Anchored racks improve stability during maintenance (when components are extended).
It protects equipment from accidental movement or vibration.
Many data center safety standards require rack anchoring before installation.
NEW QUESTION # 36
Which two components are different between VSP 5500 and VSP 5600 systems? (Choose two.)
- A. Controller Board
- B. Hitachi Interconnect Edge (HIE)
- C. DKC Power Supply (DKCPS)
- D. Interconnect Switch (ISW)
Answer: A,C
Explanation:
Controller Board
The VSP 5600 controllers use upgraded blades featuring dual 10-core Cascade Lake CPUs and two Compression Accelerator Modules per controller, hardware not present on the VSP 5500 controllers, delivering significantly higher processing and ADR offload capabilities.
DKC Power Supply (DKCPS)
A non-disruptive Data-in-Place upgrade from VSP 5500 to VSP 5600 requires swapping each VSP 5500's DKCPS units for the VSP 5600-specified power supplies, as the newer models use a different PSU design.
NEW QUESTION # 37
How do you validate the network settings configuration on a newly installed VSP 5000 storage system?
- A. Using an external network configuration audit tool
- B. Through the management console's network test function
- C. By disconnecting and reconnecting the network cables
- D. By performing a system reboot
Answer: B
Explanation:
The Hitachi VSP 5000 storage system provides a built-in management interface that allows administrators to verify configuration settings after installation.
Using the management console network test tools, administrators can:
Validate IP configuration
Check network connectivity
Verify gateway and DNS settings
Test communication with management hosts or monitoring systems
These built-in diagnostic functions help ensure that the network configuration is correct and operational before the system goes into production.
NEW QUESTION # 38
You are installing a VSP 5000 system, it is connected to the power distribution and you now want to power it up. Which three steps should you perform as part of the Power On sequence?
(Choose three.)
- A. Turn on the PS ON/PS OFF switch on the HSNPANEL0.
- B. Press the LAN Reset Button on CBX 0.
- C. Turn on the main breakers at the PDUs.
- D. Press the Power Button on each CBX.
- E. Check that the Power LED on all the CBXs are on.
Answer: A,C,D
Explanation:
Turn on the main breakers at the PDUs.
Power distribution must be enabled first by switching on the main breakers to supply electricity to the entire system.
Turn on the PS ON/PS OFF switch on the HSNPANEL0.
Activating the PS ON/PS OFF switch on the HSN panel supplies power to system components.
Press the Power Button on each CBX.
Each Controller Box (CBX) must be powered on individually by pressing its power button to start the system boot process.
NEW QUESTION # 39
Which three Channel Board (CHB) protocols are supported on a VSP 5000 system? (Choose three.)
- A. iSCSI
- B. FC
- C. FICON
- D. Wide SCSI
- E. SCSI
Answer: A,B,C
Explanation:
iSCSI
The VSP 5000 supports iSCSI Channel Boards, enabling block storage over IP networks.
FICON
FICON Channel Boards are supported for mainframe connectivity.
FC
Fibre Channel (FC) Channel Boards are supported for high-performance SAN connectivity.
NEW QUESTION # 40
Which two statements are correct regarding the "New Installation" procedure on a VSP 5000 system? (Choose two.)
- A. Customer Engineers (CEs) should always perform the "New Installation" procedure when a new unit arrives at customer site.
- B. Hitachi Vantara recommends not to perform the "New Installation" procedure on second-hand systems.
- C. You can perform the "New Installation" procedure if a newly installed system does not power on and the Hitachi Vantara Technical Support instructs you to do so.
- D. A customer can make a request to Hitachi Vantara Technical Support for a "New Installation" procedure, if they want to reinitialize a system entirely so all former data will be erased.
Answer: B,D
Explanation:
Hitachi Vantara recommends not to perform the "New Installation" procedure on second-hand systems.
Performing the "New Installation" procedure on used or second-hand systems is not recommended due to potential configuration, licensing, and warranty concerns.
A customer can make a request to Hitachi Vantara Technical Support for a "New Installation" procedure, if they want to reinitialize a system entirely so all former data will be erased.
Customers may request Technical Support to perform a "New Installation" to fully reinitialize the system, which erases all existing data and restores factory settings.
NEW QUESTION # 41
......
Free HQT-4160 Test Questions Real Practice Test Questions: https://freepdf.passtorrent.com/HQT-4160-latest-torrent.html